IMPAGLO Machinery (Tianjin) Co.,LTD

OUR DEVICES Equipment And Accessories From details to the whole, Impaglo provides you with a one-stop solution for mechanical equipment and spare parts

Steam Injection System

Purpose: The system is designed to inject a certain amount of steam into the upper and lower surfaces of the slab before it enters the press. The goal is to increase the temperature of the slab and change the conductivity of the wood, thereby shortening the curing time and increasing the production capacity of the production line.The system is designed to inject a certain amount of steam into the upper and lower surfaces of the slab before it enters the press. The goal is to increase the temperature of the slab and change the conductivity of the wood, thereby shortening the curing time and increasing the production capacity of the production line.The system is designed to inject a certain amount of steam into the upper and lower surfaces of the slab before it enters the press. The goal is to increase the temperature of the slab and change the conductivity of the wood, thereby shortening the curing time and increasing the production capacity of the production line.

More >

Thickness Gauging System and Blister Classifier

Purpose: Thickness Gauging System IMAL TM200 is used for on-line measurement of thickness of particle boards,0SB and MDF or similar boards. Even though the board travels at a speed of 210 m/min, IMAL TM200 can still operate while its measuring head remains closed. The IMAL WINBLISTER system IMAL BL100 has been designed for the on-line detection of flaws or imperfections which may occur in wood-based panels (particleboard, OSB,MDF,Plywood and LVL) such as unglued areas, blistered or blown areas, bubbles,cracks,etc.

More >

Blender

Purpose: IPL blenders have long chambers for low speed and long blending of particles and resin. This reduces the breakage of the large particles, minimizes the centrifugation of the fines and distributes the glue over all the fractions in a much more uniform and even manner. The optional Microcomp CGDW(optional), blender mixing time control unit, enables a good quality and constant blend to be achieved by adjusting the discharge gate.

More >

Knife Ring Flakers

Purpose: Knife Ring Flakers must generate enough centrifugal strength to maintain the chips constantly pressed against the knives and fight the shearing stress. Conventional Flakers are designed to refine chips of regular size and mass. But, they do not generate enough strength to refine material of small size-mass, i.e. micro-chips, oversize particles sawdust cubes, etc. In this case the reduced centrifugal strength is not sufficient to fight the shearing stress and small material go on jumping into the knife ring, which transforms them in toothpicks and sub-cubes with a fast loss of cutting capacity of knives. Starting from these physics concepts, we re-invented the Knife Ring Flakers .

More >

Super Screen

Purpose: Used in particleboard production line for particles screening.

More >